[VDS] OMP Corsica, 5Zigen Rims, Bosch Injectors etc
Publié : 11 Avr 2011, 19:01Hello guys,
some of you might already know my project which i introduced in my project thread here.
However due to high tuition fees of my next university i have to sell the car to finance my further studies.
Nearly all parts are brand new, that means that they were test fitted but were never runned in the car.
If a part is used i will mention this and the condition of the part.
For many other S13/S14/S15/R32/R33/R34 specific parts please check my sales-thread over at performance-silvia:
http://www.performance-silvia.com/viewt ... =24719&e=0
Parts of these manufacturers are/were for sale: Apexi Cusco Greddy HKS Blitz Nismo Tomei Blitz
Shipping costs (insured) are depending on the weight:
France: 15,00 - 25,00 EUR (Please request for exact shipping cost)
You are also welcome to pick your desired part up in the near of 76133 Karlsruhe, Germany (70km north of Strasbourg).
If you have any questions or if you are interested in the parts just let me know by a private message.
6x Bosch Injectors 440cc (480cc 550cc 600cc) Top Feed, EV 6 CS incl. Plug . Price 570,00 EUR
This injectors are brand new and fully functional, are also beeing used by Porsche in the GT3, New price was ~700,00 EUR, Bosch part number 0280156012,
high impedance 12 Ohm, max. 8 bar fuel pressure, can be used on 6 bar pressure all day long:
453cc @ 43.5 psi/3 Bar (standard-pressure), max. ~400hp,
480cc @ 49 psi/3.4 Bar, max. ~450hp,
555cc @ 65 psi/4.5 Bar, max. ~500hp,
600cc @ 76 psi/5.2 Bar max. ~550hp,
640cc @ 87 psi/6 Bar, max. ~600hp
RB20DET & RB25DET NEO - plug & play
RB25DET - you will need a Greddy/Freddy Inlet + top feed rail + use included plugs
RB26DETT - you have to remove/bypass the small resistor pack see here
All other engines - please request for compatibility information
Datasheet downloadable here, a good FPR is for example the "FSE Motorsport 6 Bar",
every good mapper should can work with these injectors, same performance and quality as Nismo injectors but much cheaper.
OMP Corsica wild leather steering wheel. 350mm diameter, 95mm deep- 120,00 EUR
5Zigen FN01R-C, 17x9" +15 and 18x9.5" +12 with nearly new 235/40/17 and 265/35/18 Bridgestone Potenza RE050A. 1250,00 EUR
The Tyres and rims are in a very good condition as they only covered 3000km.
New price of the rims was 1050,00 EUR + 700,00 EUR for the tyres = 1750,00 EUR!!
This rims are extremely light, 17x9 = 8.6kg, 18x9.5 = 10.4 kg.
some of you might already know my project which i introduced in my project thread here.
However due to high tuition fees of my next university i have to sell the car to finance my further studies.
Nearly all parts are brand new, that means that they were test fitted but were never runned in the car.
If a part is used i will mention this and the condition of the part.
For many other S13/S14/S15/R32/R33/R34 specific parts please check my sales-thread over at performance-silvia:
http://www.performance-silvia.com/viewt ... =24719&e=0
Parts of these manufacturers are/were for sale: Apexi Cusco Greddy HKS Blitz Nismo Tomei Blitz
Shipping costs (insured) are depending on the weight:
France: 15,00 - 25,00 EUR (Please request for exact shipping cost)
You are also welcome to pick your desired part up in the near of 76133 Karlsruhe, Germany (70km north of Strasbourg).
If you have any questions or if you are interested in the parts just let me know by a private message.
6x Bosch Injectors 440cc (480cc 550cc 600cc) Top Feed, EV 6 CS incl. Plug . Price 570,00 EUR
This injectors are brand new and fully functional, are also beeing used by Porsche in the GT3, New price was ~700,00 EUR, Bosch part number 0280156012,
high impedance 12 Ohm, max. 8 bar fuel pressure, can be used on 6 bar pressure all day long:
453cc @ 43.5 psi/3 Bar (standard-pressure), max. ~400hp,
480cc @ 49 psi/3.4 Bar, max. ~450hp,
555cc @ 65 psi/4.5 Bar, max. ~500hp,
600cc @ 76 psi/5.2 Bar max. ~550hp,
640cc @ 87 psi/6 Bar, max. ~600hp
RB20DET & RB25DET NEO - plug & play
RB25DET - you will need a Greddy/Freddy Inlet + top feed rail + use included plugs
RB26DETT - you have to remove/bypass the small resistor pack see here
All other engines - please request for compatibility information
Datasheet downloadable here, a good FPR is for example the "FSE Motorsport 6 Bar",
every good mapper should can work with these injectors, same performance and quality as Nismo injectors but much cheaper.
OMP Corsica wild leather steering wheel. 350mm diameter, 95mm deep- 120,00 EUR
5Zigen FN01R-C, 17x9" +15 and 18x9.5" +12 with nearly new 235/40/17 and 265/35/18 Bridgestone Potenza RE050A. 1250,00 EUR
The Tyres and rims are in a very good condition as they only covered 3000km.
New price of the rims was 1050,00 EUR + 700,00 EUR for the tyres = 1750,00 EUR!!
This rims are extremely light, 17x9 = 8.6kg, 18x9.5 = 10.4 kg.